Lightweight and compact, the Hitachi DS12DVF3 cordless drill driver can work even in space-constrained areas. Thanks to the 3/8-inch keyless chuck, this 12 volt Hitachi drill driver lets you change the drill bit quickly and easily. Featuring a 2-speed transmission, the Hitachi DS12DVF3 kit with flashlight can be put to a variety of applications. Moreover, this Hitachi drill driver is equipped with a 22-stage clutch, which minimizes sudden high-torque reactions by restricting bit jams. Equipped with a soft non-slip elastomer grip, this cordless drill driver can be held conveniently for a fatigue-free performance. Additionally, the 1.4 Ah NiCd batteries used with this drill offer extended operation on a single charge.
Oxy-fuel welding and oxy-fuel cutting are processes that use fuel gases and oxygen to weld and cut metals, respectively.The regulator is used to control pressure from the storage medium by reducing pressure and regulating flow rate.A sturdy well balanced injector type hand cutting blowpipe.
To cut upto 300mm thick mid steel.Injection type cutters can be used with dissolved Acetylene Cylinders.Can be also used for lpg with suitable nozzle.standard version is 450mm/90 degree also available in different lengths and head angles.The other models can be made available against specific orders.
A transformer style welding power supply converts the high voltage and low current electricity from the utility mains into a high current and low voltage, typically between 17 to 45 volts and 55 to 590 amps. A rectifier converts the AC into DC on more expensive machines.
This design typically allows the welder to select the output current by variously moving a primary winding closer or farther from a secondary winding, moving a magnetic shunt in and out of the core of the transformer, using a series saturating reactor with a variable saturating technique in series with the secondary current output, or by simply permitting the welder to select the output voltage from a set of taps on the transformer's secondary winding. These transformer style machines are typically the least expensive.
MIG / MAG / C02 Welding Machines are widely used in small as well as large Industries doing Fabrication Work, right Irom General Repair Work,
Grill Making to Heavy Machine Building, Body Building, Vessel Building and Heavy Structural Work, using Copper Coated Wires.Having Latest Technology Circuit Modular Compact, suitable for Girfic Welding Applications, Sturdy Construc tion for any type of Job using Copper coated wire for smooth and Spatter Free Welding Continuously/Intermittently. It is universally known as Metal Inner Gas (MIQ) / Metal Active Gas (MAG), Welding Process using Argon Gas or Co2 Gas for shielding the weld pool to avoid oxide formation during welding. It is a sort of Semi-Automatic Welding Process.
It's a choice for mild steel sheet metal fabrication, works with any electrode, heavy industrial applications, site applications, rugged and tough. Suitable for continuous welding with 2.0mm, 3.15mm, 4.0mm, 5.0mm, 6.0mm electrodes. Can also be used for Carbon Arc Gouging. Suitable for on site application where duty cycle demand is high.On Load Power Consumption upto 50% lesser than conventional Non-inverter type welding equipment.
Designed to work under wide voltage fluctuations, protected against Over Voltage, Under Voltage, Over Heating, Over current for IGBT protection with indication.Excellent and smooth DC ensure super strengths on weld joints.Forced Air Cooling system for maintaining proper temperature.